Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Latch: Service and Repair

SEAT LATCH ROD REPLACEMENT - REAR NO. 2

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.




2. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).




3. Remove the seat riser latch assembly (1) from the seat latch rod (2).




4. Remove the retainer nut (2) from each end of the seat latch rod (1).
5. Remove the seat latch rod.

INSTALLATION PROCEDURE
1. Install the seat latch rod (1) to the inner and outer riser assemblies.




2. Install a retainer nut (2) on each end of the seat latch rod (1).




3. Install the seat riser latch assembly (1) to the seat latch rod (2).




4. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two bolts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the rear seat cushion bolts to 11 N.m (97 lb in).

5. Install the seat in the vehicle.