Removal (With RPO Code HT6/HD6/HU6)

COMPRESSOR CONTROL SWITCHES REMOVAL (WITH RPO CODE HT6/HD6/HU6)


TOOLS REQUIRED
- J 43600 ACR 2000 Air Conditioning Service Center
- J 5403 Snap Ring Pliers
- J 9553-01 O-Ring Remover




1. Recover the refrigerant using the J 43600.
2. Disconnect the electrical connector from the switch (2) in the rear head of the compressor.
3. Remove the switch retaining ring using the J 5403.
4. Remove the switch (2) from the compressor.
5. Remove the old O-ring seal from the switch cavity using the J 9553-01.
6. Inspect the switch cavity and the O-ring groove in the rear head for dirt or foreign material. Clean the components as necessary.