Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2004 >> Sierra 2500 2WD V8-8.1L VIN G >> Repair and Diagnosis >> Body and Frame >> Access Cover >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Access Cover: Service and Repair

Engine Sight Shield Replacement

Removal Procedure





1. Unsnap the intake manifold sight shield from the stud.
2. Remove the sight shield from the sight shield bracket.
3. Remove the sight shield bracket retainer nuts (1), if necessary.
4. Remove the sight shield bracket from the studs (2), if necessary.

Installation Procedure





1. Install the sight shield bracket to the studs (2), if necessary.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the sight shield bracket nuts (1), if necessary.
Tighten the nuts to 5 Nm (44 inch lbs.).

3. Notice: Use care when installing the engine sight shield to avoid contacting the Manifold Absolute Pressure (MAP) sensor wire harness connector. Loss of engine performance or engine damage may result.
pro multis · About Operation CHARM