Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gear Sensor/Switch: Service and Repair


Backup Lamp Switch Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the backup lamp switch electrical connector.





3. Remove the backup lamp switch.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Important: The backup lamp switch has pre-applied thread sealant on the threads.

Install the backup lamp switch.
^ Tighten the backup lamp switch to 37 Nm (27 ft. lbs.).
2. Connect the backup lamp switch electrical connector.
3. Lower the vehicle.