Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2006 >> Yukon 4WD V8-5.3L VIN T >> Repair and Diagnosis >> Windows and Glass >> Windows >> Power Window Switch >> Service and Repair >> Door Lock and Side Window Switch Replacement - Passenger Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Door Lock and Side Window Switch Replacement - Passenger Side



SWITCH REPLACEMENT - DOOR LOCK AND SIDE WINDOW - PASSENGER

REMOVAL PROCEDURE




1. Remove the front door trim panel.
2. Remove the screw (2) that retains the switch panel bezel (1) to the front door trim panel.




3. Remove the switch panel bezel from the door panel using a flat-bladed tool.




4. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
5. Remove the door module from the switch panel bezel.

INSTALLATION PROCEDURE




1. Install the door module into the switch panel bezel until it snaps into place.
2. Install the switch panel bezel and module into the door trim panel.




3. Install the screw (2) that retains the switch panel bezel (1) to the front door trim panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screw (2) to 2 N.m (18 lb in).

4. Install the front door trim panel.
5. Perform the necessary setup and programming procedures. Refer to Door Control Module Programming and Setup in Vehicle Control Systems.
pro multis · About Operation CHARM