Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement

Removal Procedure





1. Remove the oil level indicator.
2. Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (4.8L, 5.3L, 6.0L, and 6.2L) (Service and Repair)Exhaust Manifold Replacement - Right Side (6.6L) (Service and Repair)Exhaust Manifold Replacement - Right Side (4.3L) (Service and Repair) .




3. Remove the oil level indicator tube bolt.
4. Remove the oil level indicator tube using a twisting motion.
5. Clean the old sealer from the indicator tube and engine block.



Installation Procedure





1. Apply sealant around the indicator tube 13 mm (0.5 in) below the tube bead. Refer to Adhesives, Fluids, Lubricants, and Sealers (Specifications) for the correct part number.
2. Install the indicator tube. Rotate the oil level indicator tube into position.

Caution: Refer to Fastener Caution (Fastener Caution) .

3. Install the indicator tube bolt.

Tighten the bolt to 12 Nm (106 lb in).





4. Install the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (4.8L, 5.3L, 6.0L, and 6.2L) (Service and Repair)Exhaust Manifold Replacement - Right Side (6.6L) (Service and Repair)Exhaust Manifold Replacement - Right Side (4.3L) (Service and Repair) .
5. Install the oil level indicator.