80. Exhaust Manifold Installation - Right Side

Exhaust Manifold Installation - Right Side





1. Install the NEW exhaust manifold gaskets.




2. Install the exhaust manifold.
3. Install the spark plug wire shields.
4. If reusing the fasteners, apply threadlock GM P/N 12345493 (Canadian P/N 10953488) or equivalent, to the threads of the exhaust manifold bolts.
Caution: Refer to Fastener Caution (Fastener Caution) .
5. Install the exhaust manifold bolts.

1. Tighten the exhaust manifold bolts on the first pass to 15 Nm (11 lb ft) .
2. Tighten the exhaust manifold bolts on the final pass to 30 Nm (22 lb ft) .

6. Install the spark plug wires to the spark plug wire retainers.
7. Install the spark plug wires onto the spark plugs.