Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Reaction Carrier Shaft Replacement
Reaction Carrier Shaft Replacement
Removal Procedure
Tools Required
* J 8092 Universal Driver Handle - 3/4 in - 10
* J 7004-A Universal Remover
* J 23907 Slide Hammer with Bearing Adapter
* J 25019-14 Stator Pump Bushing Remover
* J 29369-2 Bushing and Bearing Remover 2-3 in
* J 34196-B Transmission Bushing Service Set
1. Remove the reaction carrier shaft/internal gear retainer (668) and the reaction carrier shaft (666) from the input internal gear (664).
2. Inspect the reaction carrier shaft (666) and the input internal gear (664) for the following defects:
* Scoring
* Cracking
* Damaged or worn bushings
* A cracked shaft
* A damaged spline
* Damaged gear teeth
3. UsingJ 29369-2 withJ 23907 , remove the reaction carrier shaft front bushing (665).
4. UsingJ 25019-14 withJ 7004-A , remove the reaction carrier shaft rear bushing (667).
Installation Procedure
1. Using J 34196-3 which is part of kitJ 34196-B withJ 8092 , install a new reaction carrier shaft front bushing (665).
2. Using J 34196-3 which is part of kitJ 34196-B withJ 8092 , install a reaction carrier shaft rear bushing (667).