Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2011 >> Canyon 2WD L5-3.7L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair




Accelerator Pedal Position Sensor Replacement

Removal Procedure




1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
2. Remove the APP sensor nuts.
3. Remove the APP sensor from the vehicle.

Installation Procedure




1. Position the APP sensor over the studs.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the APP sensor nuts.

Tighten the APP sensor mounting nuts to 9 Nm (80 lb in).

3. Connect the APP sensor electrical connector.
4. Inspect below the pedal for binding, to ensure full range of motion.

pro multis · About Operation CHARM