Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2011 >> Canyon 2WD L5-3.7L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position Sensor Replacement - Exhaust
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor Replacement - Exhaust




Camshaft Position Sensor Replacement - Exhaust

Removal Procedure




1. Disconnect the engine wiring harness electrical connector (4) from the exhaust camshaft position (CMP) sensor (5).




2. Remove the exhaust CMP sensor retaining bolt.
3. Remove the exhaust CMP sensor from the cylinder head.

Installation Procedure

1. Lightly lubricate the O-ring seal with clean engine oil.




2. Install the exhaust CMP sensor into the cylinder head.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the exhaust CMP sensor bolt.

Tighten the CMP sensor bolt to 10 Nm (89 lb in).




4. Connect the engine wiring harness electrical connector (4) to the exhaust CMP sensor (5).

pro multis · About Operation CHARM