Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Backup Lamp Switch: Service and Repair




Backup Lamp Switch Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Disconnect the backup lamp switch electrical connector (3).




3. Remove the backup lamp switch.

Installation Procedure





Caution: Refer to Component Fastener Tightening Caution Component Fastener Tightening Caution.

Note: The backup lamp switch has pre-applied thread sealant on the threads.

1. Install the backup lamp switch.

Tighten the switch to 37 Nm (27 lb ft).




2. Connect the backup lamp switch electrical connector (3).
3. Lower the vehicle.