Torque Specifications

Intake Manifold, Air Valve, EGR Valve, Thermo Valves And Temp. Sender:

Exhaust Manifold, Brackets And Tubes, O2 Sensor:

Cylinder Head And Valve Cover:

Camshaft, Rocker Arm Assy, Distributor And Thermostat Housing:

Valves, Springs And Keepers:

Rocker Arm Assy Installation Sequence:

Intake And Exhaust Manifolds:

Exhaust Manifold Bracket:

Cylinder Head Installation Torque And Sequence - Tighten In 2 Steps:

Torque cylinder head bolts in 2 steps, following sequence shown in figure:

1st step: torque bolts to 22 ft. lbs.
2nd step: torque bolts to 49 ft. lbs.

Timing Components:

Lower Engine:

Piston And Connecting Rod:

Water Pump, Oil Pan, Drain Plug, O/F Base And Oil Pressure Sender:

Water Pump Components: