2-Way Power

SRS components are located in this area. Review the SRS component locations, and precautions and procedures in the SRS section before performing repairs or service.

2-Way Power With Side Airbag:

Disassemble the front seat as shown.

Reassemble the seat in the reverse order of disassembly, and note these items.
- Route the seat wire harness correctly, Coupe, Sedan.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
- Replace the back panel clips with new ones.