Door Lock Switch Test

Door Lock Switch Test

1. Remove the inner door handle.




2. Remove the two screws (A), then remove the door lock switch (B).
3. Check for continuity between the No.1 and No.2 terminals in each switch position.
- There should be no continuity with the door lock switch in LOCK.
- There should be continuity with the door lock switch in UNLOCK.

4. Check for continuity between the No.2 and No.3 terminals in each switch position.
- There should be continuity with the door lock switch in UNLOCK.
- There should be no continuity with the door lock switch in LOCK.

5. If the continuity is not as specified, replace the switch.