License Plate Frame: Service and Repair
Rear License Trim ReplacementNOTE:
- Take care not to scratch the tailgate.
- Put on gloves to protect your hands.
1. Remove the tailgate lower trim panel.
2. From inside the tailgate, disconnect the rear license light subharness connector (A), and detach it from the tailgate. With navigation system: Disconnect the rear camera unit connector (B), and detach it from the tailgate. Remove the bolts securing the rear license molding and rear license trim.
3. Remove the rear license trim (A).
1. Open the tailgate.
2. From inside the tailgate, detach the clips (B, C).
3. Gently close the tailgate.
4. Release the harness grommet (D) from the body, then pull out the rear license light subharness (E).
4. With navigation system: Remove the rear license molding (A).
1. Pull out the molding to detach the clips (B) from the rear license trim (C).
2. Remove the screws (D), then remove the rear camera unit (E) from the rear license trim.
3. Disconnect the rear license light connectors (F).
5. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Make sure the rear license light subharness connector is plugged in properly.
- Make sure the harness grommet is installed securely.
- Push the clips into place securely.