Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2005 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Testing and Inspection

Transmission Range Switch Test





1. Remove the transmission range switch harness connector (A) from the connector bracket (B), then disconnect the connector.





2. Check for continuity between terminals at the harness connector. There should be continuity between the terminals in the following table for each switch position.





3. If there is no continuity between any terminals, remove the transmission range switch cover.





4. Disconnect transmission range switch connector.





5. Check for continuity between terminals at the switch connector. There should be continuity between the terminals in the following table for each switch position.
6. If there is no continuity between any terminals, check the transmission range switch installation. If the transmission range switch installation is OK, replace the switch. If the transmission range switch continuity check was OK, replace the faulty transmission range switch harness.

pro multis · About Operation CHARM