Trunk / Liftgate Lock Cylinder: Service and Repair

Hatch Lock Cylinder Replacement

NOTE: Put on gloves to protect your hands.

1. Remove these items:
- Hatch lower trim panel.
- Rear license trim.




2. Disconnect the cylinder rod (A).




3. From outside the hatch, remove the bolt securing the lock cylinder (A). From inside the hatch, pull the lock cylinder out by releasing the hook (B).
4. Install the lock cylinder in the reverse order of removal, and note these items:
- Make sure the rod is connected properly.
- Make sure the hatch opens properly and locks securely.