Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2005 >> Civic Si L4-2.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Power Transistor HVAC >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Transistor HVAC: Testing and Inspection

Power Transistor Test

1. Disconnect the 4P connector from the power transistor




2. Measure the resistance between the No 1 and No 2 terminals of the power transistor It should be about 1.4 - 1.5 kOhm
- If the resistance is within the specifications, go to step 3
- If the resistance is not within the specifications replace the power transistor




3. Carefully release the lock tab on the No 4 terminal (BLU/YEL) (A) in the 4P connector, then remove the terminal and insulate it from body ground
4. Reconnect the 4P connector to the power transistor
5. Supply 12 volts to the No 4 cavity with a jumper wire
6. Turn the ignition switch ON (II), and check that the blower motor runs
- If the blower motor does not run, replace the power transistor
- If the blower motor runs, the power transistor is OK
pro multis · About Operation CHARM