Rear Door Weatherstrip: Service and Repair

Rear Door Weatherstrip Replacement

NOTE:
- Take care not to scratch the door.
- Use a clip remover to remove the clips.




1. Detach the clips (A, B), release the double-sided adhesive tape (C), then remove the door weatherstrip (D).
2. Install the weatherstrip in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Scrape off the remaining double-sided adhesive tape from the weatherstrip and rear door, and clean the weatherstrip and rear door with alcohol. Attach new double-sided adhesive tape (3M 4213, or equivalent) to the weatherstrip.
- Make sure the weatherstrip is installed in the holder (E) securely.
- Check for water leaks.
- Test-drive and check for wind noise.