Front Passenger's Seat Riser Disassembly/Reassembly

Front Passenger's Seat Riser Disassembly/Reassembly

The seat weight sensor (SWS) unit must be calibrated after any of these procedures:
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors
- Replacement of the seat weight sensor unit

NOTE:
- When tightening the weight sensor mounting nuts, starting at the rear, tighten the nuts in the sequence shown. Improper tightening could cause the front passenger's airbag system to malfunction.
- Make sure the weight sensor unit connectors plugged in properly.
- Make sure the weight sensor wires are routed properly so they are not pinched or interfer with other parts.