Front Seat Disassembly/Reassembly - Driver's 8-Way Power

Front Seat Disassembly/Reassembly - 8-Way Power

Special Tools Required
KTC trim tool set SOJATP2014

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.

The operation of the driver's seat position sensor must be checked after any of these procedures:
- Driver's seat position sensor replacement
- Cover plate (front side of driver's seat slide rail) replacement

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Route the seat wire harness correctly.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.