3rd Clutch Transmission Fluid Pressure Switch Replacement

3rd Clutch Transmission Fluid Pressure Switch Replacement





1. Remove the ATF temperature sensor harness clamp bolt (A), and disconnect the ATF temperature sensor connector (B).
2. Disconnect the connector from the 3rd clutch transmission fluid pressure switch (C).
3. Replace the 3rd clutch transmission fluid pressure switch, then install a new one with a new sealing washer (D). Tighten the switch on the metal part, not the plastic part.
4. Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.
5. Install the ATF temperature sensor harness clamp, then connect the connector.