Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Hazard Warning Switch Test/Replacement




Hazard Warning Switch Test/Replacement

1. Remove these items:

- Center vent for with navigation system Dashboard Center Vent Removal/Installation (With Navigation).
- Audio unit for without navigation system Audio Unit Removal/Installation (Without Navigation).

2. Remove the hazard warning switch (A).

With navigation system





Without navigation system





3. Check for continuity between the terminals in each switch position according to the table.

NOTE:

- Make sure the correct test lead (+ or -) is placed on the terminal.
- When checking for continuity across the diode, use the diode setting () on the digital volt/ohm meter to check the diode bias.
- Be careful of this characteristic; a diode is one that conducts fully in one direction (forward) and not at all in the opposite direction (reverse).





4. If the continuity is not as specified, replace the hazard warning switch.