Wiper Arm: Service and Repair

Wiper Arm Replacement

NOTE:

- Before removal and installation, turn the wiper/washer switch ON to (LO) or (HI) position, then OFF to return the motor shaft to the park position.
- Do not use the wiper/washer switch (INT) position in this step.

1. Open the hood. Remove the caps (A) and nuts (B).

NOTE: The illustration shows 4-door model.






2. Close the hood, then spread protective cloths (A) on the hood to avoid scratching the hood edge.

NOTE: The illustration shows 4-door model.





3. Raise the wiper arms (B) off the windshield, then remove the wiper arms.

4. Install the wiper arms in the reverse order of removal. After installation, adjust the wiper arms:

- 4-door Wiper Arm/Nozzle Adjustment (4-door)
- 2-door Wiper Arm/Nozzle Adjustment (2-door)