Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2011 >> Insight L4-1.3L Hybrid >> Repair and Diagnosis >> Heating and Air Conditioning >> Cabin Temperature Sensor / Switch >> Service and Repair >> Humidity/In-Car Temperature Sensor Trim Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Humidity/In-Car Temperature Sensor Trim Removal/Installation




Humidity/In-Car Temperature Sensor Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the instrument panel Instrument Panel Removal/Installation.

2. Remove the humidity/in-car temperature sensor trim (A).

1. Remove the screw.

2. Pull out the humidity/in-car temperature sensor trim slightly toward you, detach the clips, and disconnect the aspirator air hose (B) and the humidity/in-car temperature sensor connector (C).





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure each connector is plugged in properly.

pro multis · About Operation CHARM