Vehicle Moves In N, Shift Cable Is Properly Adjusted

Vehicle moves in N, shift cable is properly adjusted

Forward clutch assembly defective

Reverse brake defective

Reverse brake piston stuck, worn or damaged

Input shaft worn or damaged

Input shaft needle bearing seized, worn or damaged

Manual valve lever and pin worn or damaged

Manual valve body assembly defective

Notes

Check the forward clutch pressure.

Notes

Inspect the clutch piston, the clutch piston check valve, and the O-rings. Check the spring retainer for wear and damage. Inspect the clearance between the clutch end-plate and the top disc. If the clearance is out of tolerance, inspect the clutch discs and plates for wear and damage. If the discs and plates are worn or damaged, replace them as a set. If they are OK, adjust the clearance with the clutch end-plate.

Notes

Check the reverse brake pressure.

Notes

Inspect the reverse brake piston and the O-rings. Check the spring retainer for wear and damage. Inspect the clearance between the reverse brake end-plate and the top disc. If the clearance is out of tolerance, inspect the reverse brake discs and plates for wear and damage. If the discs and plates are worn or damaged, replace them as a set. If they are OK, adjust the clearance with the reverse brake end-plate.