Accessory Control Display: Service and Repair

Interface Dial Removal/Installation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

1. Remove these items:

- Center middle panel Dashboard Center Middle Panel Removal/Installation
- Passenger's middle panel Dashboard Passengers Middle Panel Removal/Installation
- Center panel Dashboard Center Panel Removal/Installation
- Center lower console Dashboard Center Lower Console Removal/Installation

2. Remove the audio-navigation unit.

3. Remove the screw and the harness cover (A).





4. Disconnect the interface dial connector (B).

5. Remove the screws, then pull up the interface dial (A) a little with KTC trim tool as shown until the click sound is heard.





6. Pull the interface dial slowly and steadily by hand until the knob (C) and dial (D) pops off.

7. Install the interface dial in the reverse order of removal.

NOTE: If the hard buttons do not work, but the jog dial does, recheck the interface dial connector connection.