Power Mirror Actuator Test

Power Mirror Actuator Test

1. Remove the door panel:

- Driver's door panel Service and Repair.
- Front passenger's door panel Service and Repair.

2. Disconnect the 13P connector (A) from the power mirror actuator (B).






3. Check the actuator operation by connecting battery power and ground according to the table.





4. If the mirror fails to work properly, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror actuator Service and Repair.

Defogger Test

5. Check for continuity between terminals No. 7 and No. 8 of the 13P connector. There should be continuity.

6. If there is no continuity, check for an open or high resistance in the wire between the connector and the mirror holder. If the wire is OK, replace the mirror holder Mirror Holder Replacement.