Windshield Washer Motor: Service and Repair

Washer Motor/Reservoir Replacement

1. Remove the right front inner fender Front Inner Fender Replacement.

2. Disconnect the 2P connector(s) (A) from the windshield washer motor (B) and the washer fluid level switch (C) (Canada models).






USA models





Canada models





3. Disconnect the washer tube (D), then if necessary, remove the washer motor and the washer fluid level switch (Canada models).

NOTE: Fluid may flow out of the opening.

4. Remove the clip (A) and two bolts (B) from the washer reservoir (C).





5. Install the washer reservoir in the reverse order of removal. Check the washer motor operation.