Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Testing and Inspection

Fig. 10 TPS terminal identification:

1. With ignition switch Off, disconnect TPS connector.
2. Using suitable ohmmeter, check resistance between terminals 2 and 3 as shown, Fig. 10.
3. Resistance should be approximately 1.2k ohms with throttle closed and 4.9k ohms with throttle in wide open position.
4. If resistance values are not as specified, replace TPS and adjust output voltage as outlined in the "Carburetor" section.