Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 1995 >> Accent L4-1.5L SOHC Alpha Engine >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Technical Service Bulletins >> All Technical Service Bulletins >> HDS Cable Connector - Cover End Replacement >> Installation Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation Procedure






1. Slide the new cable connector cover end through the wire harness connector.









2. Fasten the rear lock latch on the wiring harness to the latch of the cable connector cover end.






3. Mount the harness connector into the cable connector cover end. Make sure the wire strands do not get caught between the harness connector and the cable connector cover end.

4. Install the cover retaining screw.






5. Install the plastic cover over the cable connector cover end.






6. Tie wrap the plastic cover to the cable connector cover end.

Note:
See TSB # 97-09-001 for proper installation procedure for the HDS HYO2 adapter cable.
pro multis · About Operation CHARM