Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Knock Sensor: Testing and Inspection
CIRCUIT DIAGRAMTROUBLESHOOTING PROCEDURESHARNESS INSPECTION PROCEDURESSENSOR INSPECTION 1.
Disconnect the knock sensor connector
2.
Measure resistance between the terminal 2 and 3.
Standard value: about 5 M Ohms [at 20°(68°F)] 3.
If the resistance is continual, replace the knock sensor.
Knock sensor torque: 16 - 25 Nm (11.8 - 18.4 lb ft)
