Front

1. Remove wiper arm mounting nut. Care must be taken not to scratch in engine hood.
2. Remove wiper arm and blade assembly.
3. Remove cowl top fastener.
4. Remove cowl top cover.
5. Remove wiper motor connector.
6. Remove wiper motor mounting bolt.
7. Disconnect motor from link, then remove motor assembly. When removing wiper motor only, it can be done by steps 5 through 7.
8. Remove wiper link mounting bolt.
9. Take out wiper link assembly from cowl top panel.
10. Reverse procedure to install noting to pivot wiper arm in order for it to be in specified position when it is stopped.