Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 1997 >> Tiburon L4-1.8L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






FRONT CROSSMEMBER
1. Install the crossmember while supporting it with a transaxle jack.
2. Install steering gear box assembly and stabilizer bar link to the vehicle.
3. Install lower arm bushing mounting bolts and nuts.





4. Install front and rear roll stopper brackets to the center member as illustration.
5. Install the center member assembly.
6. Temporarily tighten the front roll stopper bracket bolt. After the total weight of the engine has been placed on the vehicle body, securely tighten the nut then tighten the components listed below to specifications.
- Center member mounting bolt: 60-80 Nm ( 43-58 ft. lbs.).
- Front roll stopper bracket to member bolt: 30-40 Nm (25-29 ft. lbs.).
- Rear roll stopper bracket to center member bolt: 30-40 Nm (25-29 ft. lbs.).
- Insulator to transaxle mounting bracket bolts: 45-60 Nm (33-43 ft. lbs.).


pro multis · About Operation CHARM