Rear Seat
REAR SEATRear Seat:
REMOVAL AND INSTALLATION
1. Remove the bolts holding the rear seat cushion and remove it.
Tightening torque
17 - 26 Nm (170 - 260 kg.cm, 12 - 19 lb.ft)
2. Remove the bolts holding the rear side seat back and remove it. (Folding type)
3. Remove the bolts holding the rear seat and then remove the seat back (Fixed type).
Move the rear split back forward and then remove the mounting bracket.
Remove the seat back (Folding type).
Tightening torque
17 - 26 Nm (170 - 260 kg.cm, 12 - 19 lb.ft)
4. Installation is the reverse of removal. When installing the rear seat back, tighten the mounting bracket after inserting the hook on the bracket.