Rear Wiper Motor

REMOVAL




1. Remove the upper and side trim from the tailgate frame.




2. Remove the tailgate trim panel after removing 4 screws.




3. Remove the rear wiper arm after removing a nut.

Tightening torque: 14-17 Nm (140-170 kg.cm, 10.3-12.5 lb.ft)




4. Remove the hexagonal nut after removing pivot cover.

Tightening torque: 14-17 Nm (140-170 kg.cm, 10.3-12.5 lb.ft)




5. Remove the rear wiper motor after removing 3 bolts, and disconnect the motor's connector.

INSTALLATION




1. Installation is the reverse of removal.
2. Set the washer nozzle on the specified spray position.