Receiver Dryer: Service and Repair

Liquid Tank




REMOVAL




1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove front grille. Refer to "FRONT GRILLE".
3. Unscrew, and remove the securing bracket piping.
4. Unscrew liquid tank securing bands.
5. Pull out the liquid tank and liquid tank securing bands through the top.

INSTALLATION
Installation is basically the reverse order of removal.

CAUTION: Replace refrigerant pressure sensor O-ring with a new one. Apply compressor oil prior to installation.

Securing bracket piping mounting screws
Tightening torque : 4.0 - 5.0 Nm (0.41 - 0.51 kg-m, 36 - 44 in-lb)

Liquid tank securing band mounting screw
Tightening torque : 2.94 - 3.82 Nm (0.3 - 0.38 kg-m, 26 - 33 in-lb)