Work Support
WORK SUPPORT
Work Item
Cause of Auto-Cancel
1. Touch "WORK SUPPORT" on the "SELECT DIAG MODE" screen. Refer to GI-38, "CONSULT-II Start Procedure". Reading and Clearing Diagnostic Trouble Codes
2. Touch "CAUSE OF AUTO-CANCEL" on the "SELECT WORK ITEM" screen.
3. Cause of automatic cancellation screen will be shown.
CAUTION: Last five cancel (system cancel) causes are displayed.
Display Item List - Work Support:
Display Item List
Laser Beam Adjust
For details, refer to "LASER BEAM AIMING ADJUSTMENT".