Data Monitor
Data MonitorOPERATION PROCEDURE
1. After ignition switch OFF, perform "CONSULT-II Starting Procedure". Refer to GI-38, "CONSULT-II Start Procedure". Testing and Inspection
2. Touch "ABS", "DATA MONITOR" in order on CONSULT-II screen.
CAUTION: When "START (NISSAN BASED VHCL)" is touched immediately after starting engine or turning on the ignition switch, "ABS" might not be displayed in the "SYSTEM SELECTION" screen. In this case, repeat the operation from step 1.
3. At the monitor item selection screen, touch one of the items "ECU INPUT SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU".
4. Touch "START" to proceed to the data monitor screen.
DISPLAY ITEM LIST (Part 1):
DISPLAY ITEM LIST (Part 2):
DISPLAY ITEM LIST (Part 3):
