P Range Interlock Door Lock/Unlock Function Does Not Operate

P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC LOCK/UNLOCK SELECT" setting in "WORK SUPPORT".
CONSULT Function.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "Unlock Only", "Lock Only" or "Lock/Unlock" in "AUTOMATIC LOCK/UNLOCK SELECT".

2. CHECK "AUTOMATIC DOOR LOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC DOOR LOCK SELECT" setting in "WORK SUPPORT".
CONSULT Function.
Is the inspection result normal?
YES- GO TO 3.
NO- Set "P RANGE" in "AUTOMATIC DOOR LOCK SELECT".

3. CHECK "AUTOMATIC DOOR UNLOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC DOOR UNLOCK SELECT" setting in "WORK SUPPORT".
CONSULT Function.
Is the inspection result normal?
YES- GO TO 4.
NO- Set "MODE 2" or "MODE 4" in "AUTOMATIC DOOR UNLOCK SELECT".

4. REPLACE BCM

- Replace BCM. Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.