Fuel Pump: Service and Repair

Removal Procedure
1. Disconnect the negative battery cable.
2. Drain all fuel from fuel tank from filler neck.
3. Remove the fuel pump relay from the fuse and relay box at right side of engine room.
4. Remove fuel tank. Refer to Fuel Tank Removal Procedure.
5. Using J-39763, twist the fuel pump counter-clock wise to release from fuel tank.
6. Lift fuel pump to remove from fuel tank.





Inspection Procedure
Inspect in-tank fuel filter for tears, damage or evidence of dirt debris or water in the fuel. If any of these condition exist, replace the in-tank fuel filter.











Installation Procedure
1. Insert the fuel pump assembly into fuel tank and place them in their position.
2. Using J-39763, twist fuel pump assembly clock wise into the lock.