Installation

1. If the fuel injectors were removed, install them. Refer to Fuel Injectors.
2. If the fuel pressure regulator was removed, install it. Refer to Fuel Pressure Regulator.
3. Install the common chamber. Refer to common chamber in engine Mechanical.
4. Connect the vacuum hose on Canister VSV and positive crankcase ventilation hose.
5. Connect the connectors to manifold absolute pressure sensor, solenoid valve, electric vacuum sensing valve.
6. Connect the accelerator pedal cable to throttle body and cable bracket.
7. Install the engine cover.
8. Connect the negative battery cable.
9. Crank the engine until it starts. Cranking the engine may take longer than usual due to trapped air in the fuel rail and in the injectors.