Cruise Control Module: Description and Operation

Speed Control Module Alignment

Inclinometer 501-F007

1. NOTE: Make sure the vehicle is positioned on level ground such as the headlamp alignment area.

Level the vehicle ride height. For additional information, refer to the Jaguar approved diagnostic system.






2. Remove the left-hand front bumper access cover.






3. Using the special tool, check the speed control module vertical levelling.






4. Level the speed control module.
- Rotate the speed control module levelling bolt to achieve a reading of zero degrees ± 0.75 degrees.






5. Using the special tool, check the speed control module vertical levelling.






6. Install the left-hand front bumper access cover.
7. Carry out the speed control module calibration procedure. For further information, refer to the Jaguar approved diagnostic system.