Operation CHARM: Car repair manuals for everyone.
Home >> Jaguar >> 2009 >> XK (X150) V8-4.2L SC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module: Service and Repair





Pedestrian Protection Module

Removal

NOTE:
The pedestrian protection module must be renewed if the system has deployed on 3 occasions.
1 Make the pedestrian protection system safe.
2 Remove the front LH fender splash shield. For additional information, refer to Fender Splash Shield Fender Splash Shield




3 Remove the pedestrian protection module.
- Remove and discard the 2 Torx bolts.
- Disconnect the electrical connector.

Installation
1 Install the pedestrian protection module.
- Connect the electrical connector.
- Tighten the new Torx bolts to 10 Nm (7 lb.ft).
2 Install the front LH fender splash shield. For additional information, refer to Fender Splash Shield Fender Splash Shield
3 Using WDS, configure a new module.

pro multis · About Operation CHARM