Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 1991 >> Comanche 2WD L4-150 2.5L VIN P MFI >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

Engine Controller:







REMOVAL


1. Disconnect the battery negative cable.
2. Loosen 60-Way connector mounting screw until connector can be disengaged from the Single Board Engine Controller (SBEC).
3. Pull 60-Way connector straight back from SBEC.
4. Remove SBEC mounting screws.
5. Remove SBEC.



INSTALLATION


1. Install SBEC and torque the mounting screws to 9 lb.in. (1 Nm).
2. Engage the 60-Way connector into the SBEC. Tighten the connector mounting screw to 35 lb.in. (4 Nm).
3. Connect the negative cable to the battery.
pro multis · About Operation CHARM