Garage Door Opener Transmitter: Service and Repair
REMOVAL AND INSTALLATION1. Open the garage door opener storage bin door.
2. Using a trim stick or another suitable wide flat-bladed tool, gently pry between the door pivot pin and the pivot hole on one side of the overhead console housing until the pivot pin clears the pivot hole.
3. Use a gentle twisting action to remove the garage door opener storage bin door from the overhead console housing.
4. To install, insert the pivot pin on one side of the door into the pivot hole in the overhead console housing. Gently depress the pivot pin on the other side of the door until it clears the side of the garage door opener storage bin opening of the overhead console housing, and push the door into the opening. Guide the door into the opening so that the second pivot pin snaps into its pivot hole.