Trunk / Liftgate Handle: Service and Repair

EXTERIOR HANDLE

REMOVAL

1. Remove liftgate trim panel.
2. Disconnect liftgate actuator linkages.
3. Disconnect liftgate outside handle to latch rod.

Fig. 1:

4. Remove nut attaching outside handle to liftgate (Fig. 1).
5. Separate outside handle from liftgate.

Fig. 2:

6. If necessary, remove lock cylinder (Fig. 2).

INSTALLATION

1. If necessary, install lock cylinder.
2. Position outside handle on liftgate.
3. Install nut attaching outside handle to liftgate.
4. Connect liftgate outside handle to latch rod.
5. Connect liftgate actuator linkages.
6. Install liftgate trim panel.