Sun Visor: Service and Repair

SUN VISOR

REMOVAL

Fig. 16:

Fig. 17:

1. Remove the screws that attach the sunvisor arm support bracket to the headliner and the roof panel (Fig. 16) and (Fig. 17).
2. Disconnect vanity lamp connector, if equipped.
3. Detach the sunvisor from the support clip.
4. Remove the sunvisor from the vehicle.
5. Remove the retaining screw and support clip. On vehicles equipped with an overhead console, the support clip is integral with the overhead console.

INSTALLATION

1. Install the support bracket and the retaining screw.
2. Connect vanity lamp connector, if equipped.
3. Position the sunvisor in the support clip and align the arm support bracket holes with the headliner holes.
4. Install the screws that attach the sunvisor arm support bracket to the headliner and the roof panel.