Operation CHARM: Car repair manuals for everyone.
Home >> Jeep >> 2000 >> Cherokee 2WD L4-2.5L VIN P >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat Back Cushion / Cover
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Back Cushion / Cover

SEAT BACK CUSHION / COVER

REMOVAL

1. Remove seat from vehicle.
2. Remove side shield trim cover.
3. Remove seatback.
4. With the cushion side down, disengage the forward, rearward and inboard J-straps.
5. Disengage the clips attaching the outboard side of the cover to the cushion frame.
6. Turn the cushion over and roll the cover off the cushion.
7. Disengage the electrical connectors for the heated seat, if equipped.

Fig. 14:




8. Remove the hog rings attaching the cover to the cushion support wires (Fig. 14).
9. Separate the cover from the cushion.

INSTALLATION

1. Position the cover on the cushion.
2. Engage the electrical connectors for the heated seat, if equipped.
3. Install the hog rings attaching the cover to the cushion support wires.
4. With the cushion side down, engage the forward, rearward and inboard J-straps.
5. Engage the clips attaching the outboard side of the cover to the cushion frame.
6. Install seatback.
7. Install side shield trim cover.
8. Install seat.
pro multis · About Operation CHARM