Fog/Driving Lamp Bulb: Service and Repair

REMOVAL

Fog Lamp Components:

1. Remove the screws attaching the access cover to the bottom of the fog lamp.
2. Remove spring clip securing bulb to fog lamp.
3. Disconnect bulb wire connector.
4. Remove bulb element from fog lamp.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1. Position bulb element in fog lamp.
2. Connect bulb wire connector.
3. Install spring clip securing bulb to fog lamp.
4. Install screws attaching the access cover to the bottom of the fog lamp.